Linotronic 300R

 Boot Status Messages
 Code:                 Description:
 200    Selftest 0 
 201    Selftest 1
 202    Selftest 2
 203    Selftest 3
 204    Selftest 4
 205    Selftest 5 
 206    Selftest 6
 207    Selftest 7
 208    Selftest 8
 210    Selftest done


         

 Recorder Messages
 Error Code:      Description:
 001
 Film End
 002
 No take up cassette
 003    Take up cassette full
 004    Caution: Tako malfunction
 005    Cutter not home
 006    Density malfunction
 007    OLP-FLAG too long
 010    Exposure active
 011    Exposure ready
 012    Exposure stopped
 013  Test exposure ready
 014  Text exposure ready
 020  Film load active
 021  Film load ready
 022  Take up cassette fitted
 023  Insert film
 024  Adjust film
 025  Film in transport
 026  Film load stopped
 030  Film unload active
 031  Film unload active
 032  Take up casette is fitted
 040  Film advance active
 041  Film advance ready
 050  Cut active
 051  Cut ready
 052  Cut stopped
 100  Caution: Polygon error
 101  Abort: Fine density error
 102  Abort: Coarse density error
 103  Abort: Density adjust
 104  Film start / stop. No start
 105  Film start / stop inactive
 110  Abort: Fatal error BELI
 111  Abort: Command error
 112
 Abort: Data error BELI
 113  Abort: X/Y error
 116  Abort: Machine parameter
 120  Abort: Film load command error
 121  Abort: Film shutter does not close
 122  Abort: Film Tension
 141  Abort: Film unload command error
 150  Abort: Cutter does not move
 151  Abort: Cutter is blocked
 160  Abort: No input processor Clk
 161  Abort: No output process Clk
 162  Abort: Input window counter
 163  Abort: Output window counter
 164  Abort: Altern buffer A counter
 165  Abort: Altern buffer A data
 166  Abort: Altern buffer B counter
 167  Abort: Altern buffer B data
 180  Abort: Bus error
 181  Abort: Address error
 182  Abort: Ilegal instruction
 183  Abort: Zero divide
 184  Abort: CHK instruction
 185  Abort: TRAPV instruction
 186  Abort: Privilege violation
 187  Abort: Trace
 188  Abort: Reserved
 189  Abort: Trap
 190  Abort: Auto vector interrupt
 191  Abort: Hardware vector interupt
 215  Message: Adjust active
 216  Message: Adjust ready
 217  Message: Exposure active
 218  Message: Exposure ready
 219  Message: Density adjust active
 220  Message: Density adjust ready
 221  Message: Tako adjust active
 222  Message: Tako adjust ready
 233  O.L.P. error. No take up cassette
 235  Sender not active
 236  SOPR inactive
 237  SSCN exceeds active length
 238  Timeout LI2
 240  LI5 not available
 246  EEprom error Write
 248  EEprom error Data
 252  EEprom error Block
 254  NV ram error (LT50)