Epson Stylus Pro 9880C

 Maintenance Codes
 Error Code:      Description:
 0002  The number of carriage movement cycles reached the specified value.
 0040  The pump counter reached the specified upper limit.
 0400  The Pressure Pump counter reached the specified upper limit.


     
 

 Service Call Errors
 Error Code:      Description:

 00000101 
 
  The CR motor reached its end of life 
 00010000    PF motor encoder check error 
 00010001    PF motor out of step 
 00010002    Overcurrent occurred in the PF Motor
 00010003    The PF motor out of position time out error
 00010004    CR motor encoder check error 
 00010005    CR motor out of step 
 00010007    The CR Motor out of position time-out error 
 00010008    Servo interrupt watchdog time-out error
 00010009    System interrupt watchdog time-out error
 0001000A    Carriage home position detection error 
 0001000C    PG home position detection error 
 00010014    Failure of pressurizing 
 0001001B    Head driver (TG) temperature error 
 0001001D    CR servo parameter error 
 0001001E    PF servo parameter error 
 00010020    CSIC reading / writing error 
 00010023  RTC analysis error
 00010026  RTC communication error
 00010027  Pressure pump micro air-leak error
 00010028  Head error
 0001002A  CR ASIC ECU error
 0001002D  The Cleaning Unit reached its end of life
 00010035  Pump phase detection error
 00010036  Type-B board installation error
 00010037  Head thermistor error
 00010038  Transistor thermistor error
 0001003E  Pressure Sensor failure
 0001003F  The Pressure Motor reached its end of life
 00010040  Printing position error
 00020000  NVRAM error
 00020002  SDRAM error
 00020003  BOOT program SUM error
 0002000A  Program load error
 0002000B  The internal memory is insufficient
 0Dxxxxxx  An error code for debugging
 0Exxxxxx  A time-lag of the RTC timer
 100000E0  CPU address error (load)
 10000100  CPU address error (store)
 10000180  CPU reserve command code exception error
 100001A0  CPU slot undefined command exception error
 100001C0  The AC power is shut off
 100005C0  CPU DMA address error
 10000xxx  CPU error