Epson Stylus Pro 7700

 Maintenance Codes
 Error Code:      Description:
 0010  Communication with the AID Board is not established.
 The voltage applied to the Flushing Box does not reach the specified 
 level.
 4000  It detects twice in a row that all the nozzles are clogging.
 8000  Detects Noises during AID operation.


 
      
  
     


 

 Service Call Errors
 Error Code:      Description:
 1101  CR life error
 1125  CR HP detection error
 1138  Over current error 
 113A  Overload error
 113B  Over speed error
 113C  Reversing error
 113D  Driving time-out error 
 113E  Velocity deviation error 
 113F  Lock error
 122A  Overload error
 122B  Over Speed error
 122C  Reversing error
 122D  Driving time-out error
 122E  Velocity deviation error
 122F  Lock error
 131B  Head driver (transmission gate) overheat error 
 13F0  ICL operation error
 1411  Select error
 1412  Pump life error
 1419  Pump release error
 141A  Overload error
 141B  Over Speed error
 141C  Reversing Error
 141D  Pump phase detection error
 141E  Type-B board installation error
 141F  Lock error
 1427  CSIC destination setting error
 1428  Ink holder Board Assy
 1430  Holder ink pad error
 1431  Ink selector life error
 1434  IC cover unlock error
 1438  Maintenance tank error
 1439  Cap error
 143A  Overload error
 143B  Over speed error
 143C  Reversing error
 143D  Driving time-out error
 143E  Velocity deviation error
 143F  Lock error
 144A  Overload error
 144B  Over speed error
 144C  Reversing error
 144D  Driving time-out error
 144E  Velocity deviation error
 144F  Lock error
 1488
  Flushing box position error
 1489  Wiper error
 148A  Overload error
 148B  Over speed error
 148C  Reversing error
 148D  Driving time-out error
 148E  Velocity deviation error
 148F  Lock error
 1494  Ink selector error
 1496  Ink selector sensor error detection
 1497  Switching time-out error
 149D  Driving time-out error
 1501  Release motor phase detection error
 150C  PG phase detection error
 151A  Overload error
 151B  Over speed error
 151C  Reversing error
 151D  Driving time-out error
 151E  Velocity deviation error
 151F  Lock error
 152A  Overload error
 152B  Over speed error
 152C  Reversing error
 152D  Driving time-out error
 152E  Velocity deviation error
 152F  Lock error
 1530  Driven roller HP detection error
 1536  Pressurizing reset error
 1537  Pressurizing error
 153A  Overload error
 153B  Over speed error
 153C  Reversing error
 153D  Driving time-out error
 153E  Velocity deviation error
 153F  Lock error
 1540  Cutter HP detection error
 1541  Cutter return error
 1549  Motor disconnection error
 154A  Overload error
 154B  Over speed error
 154C  Reversing error
 154D  Driving time-out error
 154E  Velocity deviation error
 154F  Lock error
 1551  Paper thickness determining error
 1561  Paper thickness at power-on error
 1800  AID voltage error
 1A23  Incorrect RTC data error
 1A26  RTC Access T/O error
 1A37  Thermistor error
 1A38  Transistor environmental temperature error
 1A39  Head error
 1A40  IC22 error
 1A41  Head rank ID input error
 1A50  I2C communication error (Between elements on ASIC and MAIN)
 1A51  I2C communication error (Between elements on SUB and MAIN)
 1A52  I2C communication error (Between elements on SUB-B and MAIN)
 1A53  I2C communication error (Between elements on SUB-C and MAIN)
 2000  NVRAM error
 2002  SDRAM error
 2003  FLASH BOOT SUM CHECK error
 200A  F/W load error
 200D  System interrupt watchdog time-out error
 200E  Unknown NMI
 2010  UART communication error
 3000  AC shut-off
 D131  AID error
 Fxxx  CPU-related error
 Dxxx  Debug error