Epson Stylus Pro 7600

 Maintenance Codes
 Error Code:      Description:
 0002  CR pass count reaches the limit
 0008  RTC backup battery is empty
 0020  The number of shots (per nozzle) reaches the limit
 0040  Pump motor operation count reaches the limit
 0080  Date is not specified
 0100  RTC backup battery drops instantaneously
 0088  RTC backup battery is not installed
 

                            

 
Service Call Errors
 Error Code:      Description:
 00000101    CR motor life 
 00010000    PF motor encoder check error 
 00010001    PF motor out of step 
 00010002    PF motor overcurrent 
 00010003    PF motor in-position time-out 
 00010004    CR motor encoder check error 
 00010005    CR motor out of step 
 00010006    CR motor overcurrent 
 00010007    CR motor in-position time-out 
 00010008    Servo interrupt watchdog time-out 
 00010009    System interrupt watchdog time-out 
 0001000A    CR home position sensor error 
 0001000B    PF home position sensor erro 
 0001000C    Head slide (PG) home position sensor error 
 0001000F    CR motor PWM output faulty 
 00010010    PF motor PWM output faulty 
 0001001B    Head driver (TG) temperature error 
 0001001D    CR servo parameter error 
 0001001E    PF servo parameter error 
 00010020    CSIC reed/right error 
 00010022  Ink type error (setting on printer body side)
 00010023  RTC analysis error
 00010025  CSIC ROM communication error
 00010026  RTC communication error
 00010028  Head error
 00010029  Unidentified NMI
 0001002A  CR ASIC ECU error
 0001002B  PF ASIC ECU error
 00020000  NVRAM error
 00020002  SDRAM error
 00020003  BOOT program SUM error
 00020009  Flash memory SUM error
 0002000A  Program load error
 0002000B  Internal memory shortage error
 0002000C  Review error
 100000E0  CPU address error (load misalignment)
 10000100  CPU address error (storage misalignment)
 10000180  CPU reserve command code exception error
 100001A0  CPU slot illegal command exception error
 100005C0  CPU DMA address error
 10000xxx  CPU error